Server/nux: Unterschied zwischen den Versionen

Aus C3D2
Zur Navigation springen Zur Suche springen
Zeile 316: Zeile 316:


: <code>sudo ./ibm_fw_mpt2sas_1.15.01_linux_32-64.bin -s</code>
: <code>sudo ./ibm_fw_mpt2sas_1.15.01_linux_32-64.bin -s</code>
<pre>
Supported Linux release not detected, aborting update.
</pre>
: <code>sudo ./ibm_fw_mpt2sas_h1110-1.15.02_linux_32-64.bin -s</code>
<pre>
Supported Linux release not detected, aborting update.
</pre>
: <code>sudo ./ibm_fw_mptsas_3g-sashba-2.75_linux_32-64.bin -s</code>
<pre>
<pre>
Supported Linux release not detected, aborting update.
Supported Linux release not detected, aborting update.

Version vom 28. März 2016, 03:19 Uhr

vater benutzt das Wiki für das Erstellen eigener (zentraler) Mitschriften (zum Gerät).

Hardware

hergestellt von
IBM
hergestellt am
2009-mm-dd
Serie
x3550 M2
Typ
7946
Modell
K1G
Gerät
Prozessor
Intel Xeon E5504
Speicher
4 GB:
  • (vermutlich) DDR3-800 PC3-10600 ECC
    4 x 1 GB
  • DDR3-1333 PC3-10600 ECC
Massenspeicher
  • SAS 2,5"
2 x 146 GB
Stromversorgung
1 x 675 W
(wohl erweiterbar um 1 x 675 W)
Netzwerk
  • 4 x LAN (1000 Mbit)

Anschaffung

Preisvergleich

Software speziell für die Hardware

CentOS installieren, um die Aktualisierung der Software für die Hardware für Red Hat Enterprise Linux zu verwenden

  • Das Installieren von CentOS 7 war erfolgreich.
    Notfalls müsste das auch als Live-Medium funktionieren können.
    • Das Installieren von CentOS 6 erschien nicht möglich zu sein.
glibc.i686 fehlt

Es gibt eine Fehlermeldung.

bash: ./ibm_fw_imm_yuoog9a-1.49_linux_32-64.bin: /lib/ld-linux.so.2: bad ELF interpreter: Datei oder Verzeichnis nicht gefunden

Einfach das Paketglibc.i686 installieren.

sudo yum -y install glibc.i686

UpdateXpress

UpdateXpress System Packs Installer
  • aktuelle Version von UpdateXpress besorgen (bei IBM herunterladen)
  • aktuelle Version von UpdateXpress starten
UpdateXpress braucht eine "normal" Umgebung für den Desktop.
Da sind Software wie xorg, dbus und firefox zu installieren.
chmod 764 ibm_utl_uxspi_9.63_rhel7_x86-64.bin
./ibm_utl_uxspi_9.63_rhel7_x86-64.bin

einzelne Komponenten aktualisieren

IMM aktualisieren

2015-03-28

sudo ./ibm_fw_imm_yuoog9a-1.49_linux_32-64.bin -s
IBM Command Line IMM Flash Update Utility v1.12.28
Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009 - 2015  All Rights Reserved.

Now 1 IMM LAN-over-USB device is discovered.
Pinging IMM IP address 169.254.95.118 time out.
Refreshing LAN-over-USB IP address.  This may take several minutes.
Unable to assign dynamic IP address on LAN-over-USB interface.
Warning: LAN-over-USB interface is not working on default IP address.
Attempting to discover the IMM(s) via SLP.
Error connecting to IMM using IP address 169.254.95.118
Connecting via IPMI device driver (KCS interface)....

Update package firmware type: IMM
Update package build level:   YUOOG9A
Target's current build level: YUOO48D

The IMM is preparing to receive the update.

Transferring image: 0%
Unable to download image to IMM via port 121.
Make sure that a software firewall is not blocking outbound access to FTP.

Error flashing firmware: 41
Fail to take down the LAN-over-USB interface.

WTF!

Na dann einfach über das WUI (IMM -> Firmware Update) …

Ethernet NIC aktualisieren
sudo ./brcm_fw_nic_2.2.1a_linux_32-64.bin -s
IBM Ethernet Firmware Update Tool, Version 1.0.29


Warning. No Broadcom NetXtreme adapters found.

    ADAPTER MAC    	BOOT	IPMI	ASF	PXE	UMP	NCSI	iSCSI	EFI	IMFW	L2
-------------------	----	----	---	---	---	---	---	---	---	---
001A64E7CC46 (5709)	5.0.6	NA	NA	NA	NA	2.0.3	NA	NA	NA	NA
001A64E7CC44 (5709)	5.0.6	NA	NA	NA	NA	2.0.3	NA	NA	NA	NA

Now starting a CRC check for each Broadcom Ethernet adapter.
Performing CRC check for device 001A64E7CC46	---> successful
Performing CRC check for device 001A64E7CC44	---> successful

CRC check complete.

Updating Broadcom NetXtreme II adapters.
Updating 001A64E7CC46 using file 1639bc.bin	---> Update successful
Updating 001A64E7CC46 using file 1639ncsi.bin	---> Update successful
Updating 001A64E7CC44 using file 1639bc.bin	---> No update needed
Updating 001A64E7CC44 using file 1639ncsi.bin	---> No update needed

Warning. No Broadcom NetXtreme adapters found.

    ADAPTER MAC    	BOOT	IPMI	ASF	PXE	UMP	NCSI	iSCSI	EFI	IMFW	L2
-------------------	----	----	---	---	---	---	---	---	---	---
001A64E7CC46 (5709)	7.4.0	NA	NA	NA	NA	2.0.11	NA	NA	NA	NA
001A64E7CC44 (5709)	7.4.0	NA	NA	NA	NA	2.0.11	NA	NA	NA	NA


Update complete. The firmware update log has been saved in /var/log/IBM_Support/brcmfwup.log.
sudo ./brcm_fw_nic_2.2.1a_linux_32-64.bin -s
IBM Ethernet Firmware Update Tool, Version 1.0.29


Warning. No Broadcom NetXtreme adapters found.

    ADAPTER MAC    	BOOT	IPMI	ASF	PXE	UMP	NCSI	iSCSI	EFI	IMFW	L2
-------------------	----	----	---	---	---	---	---	---	---	---
001A64E7CC46 (5709)	7.4.0	NA	NA	NA	NA	2.0.11	NA	NA	NA	NA
001A64E7CC44 (5709)	7.4.0	NA	NA	NA	NA	2.0.11	NA	NA	NA	NA

Now starting a CRC check for each Broadcom Ethernet adapter.
Performing CRC check for device 001A64E7CC46	---> successful
Performing CRC check for device 001A64E7CC44	---> successful

CRC check complete.

Updating Broadcom NetXtreme II adapters.
Updating 001A64E7CC46 using file 1639bc.bin	---> No update needed
Updating 001A64E7CC46 using file 1639ncsi.bin	---> No update needed
Updating 001A64E7CC44 using file 1639bc.bin	---> No update needed
Updating 001A64E7CC44 using file 1639ncsi.bin	---> No update needed

Warning. No Broadcom NetXtreme adapters found.

    ADAPTER MAC    	BOOT	IPMI	ASF	PXE	UMP	NCSI	iSCSI	EFI	IMFW	L2
-------------------	----	----	---	---	---	---	---	---	---	---
001A64E7CC46 (5709)	7.4.0	NA	NA	NA	NA	2.0.11	NA	NA	NA	NA
001A64E7CC44 (5709)	7.4.0	NA	NA	NA	NA	2.0.11	NA	NA	NA	NA


Update complete. The firmware update log has been saved in /var/log/IBM_Support/brcmfwup001.log.
HDD SAS NIC aktualisieren
sudo ./ibm_fw_hdd_sas-1.13.04_linux_32-64.bin -s
Running under OS in online mode.
Running in 64 bit mode.


(C) Copyright IBM Corp.2010-2012. All Rights Reserved.

FdrvWL -- Flash Drive(s)                                         v:12.10.17.12
---------------------------------------------------------------------------------
   1 Ada:0 SID:0   PN:41Y8474:42C0251 SN:3SD26NZA FW:B53E-C271	 146GB T:2  FLASH:Ok
   2 Ada:0 SID:1   PN:41Y8474:42C0251 SN:3SD2633C FW:B53E-C271	 146GB T:2  FLASH:Ok

AdaNbr(Type)      DevFnd Flashed(SAS SATA) NbrFailed
  0(LSI-IR )           2       2   2    0          0
                    -----------------------------------------
                       2       2   2    0          0 Error(s)

Update completed successfully.
sudo ./ibm_fw_hdd_sas-1.13.04_linux_32-64.bin -s
Running under OS in online mode.
Running in 64 bit mode.


(C) Copyright IBM Corp.2010-2012. All Rights Reserved.

FdrvWL -- Flash Drive(s)                                         v:12.10.17.12
---------------------------------------------------------------------------------
   1 Ada:0 SID:0   PN:41Y8474:42C0251 SN:3SD26NZA FW:B53E-C271	 146GB T:2  Ok
   2 Ada:0 SID:1   PN:41Y8474:42C0251 SN:3SD2633C FW:B53E-C271	 146GB T:2  Ok

AdaNbr(Type)      DevFnd Flashed(SAS SATA) NbrFailed
  0(LSI-IR )           2       0   0    0          0
                    -----------------------------------------
                       2       0   0    0          0 Error(s)

Update completed successfully.
sudo ./ibm_fw_mpt2sas_1.15.01_linux_32-64.bin -s
Supported Linux release not detected, aborting update.
sudo ./ibm_fw_mpt2sas_h1110-1.15.02_linux_32-64.bin -s
Supported Linux release not detected, aborting update.
sudo ./ibm_fw_mptsas_3g-sashba-2.75_linux_32-64.bin -s
Supported Linux release not detected, aborting update.