Server/inber

Aus C3D2
Zur Navigation springen Zur Suche springen

Entscheidung

Abbildung von Realitäten als Normative des Faktischen (eigentlich sollen Entscheidungen durch Votum getroffen werden)
Grundlage Frage Antwort Gründe
faktisch Welches Betriebssystem wird installiert? FreeBSD
  • kann per Hypervisor (bhyve) Debian bereitstellen
  • kann (lang erprobt) ZFS
offen Wie ist die Bezeichnung (Ruf- und Hostname)? ?

Bezeichnung

Es gibt noch keine "finale" Bezeichnung. Innerhalb der ersten 10 Tage war #inber die wohl gängigste Bezeichnung vom Projekt.

LOIC

in Anlehnung an wikipedia:de:Low Orbit Ion Cannon

inber

in Anlehnung an das Leben IN-Berlin

Zweck

Einrichtung

Einrichtung vom Massenspeicher

nachträgliche Verschlüsslung vom Massenspeicher fürs Puffern

cache encryption
aka Verschlüsslung

Bei der Installation wurde die Massenspeicher fürs Puffern (caching) dem Pool zugeordnet. Der Massenspeicher (für ZFS Intent Log (ZIL) und L2ARC (Cache)) wurde dabei nicht verschlüsselt. Das ist mittlerweile umgesetzt mehr.

Plan
Implementierung
caches ausbinden
zpool status zroot
  pool: zroot
 state: ONLINE
  scan: none requested
config:

        NAME           STATE     READ WRITE CKSUM
        zroot          ONLINE       0     0     0
          raidz2-0     ONLINE       0     0     0
            da0p5.eli  ONLINE       0     0     0
            da1p5.eli  ONLINE       0     0     0
            da2p5.eli  ONLINE       0     0     0
            da3p5.eli  ONLINE       0     0     0
        logs
          mirror-1     ONLINE       0     0     0
            gpt/log0   ONLINE       0     0     0
            gpt/log1   ONLINE       0     0     0
        cache
          gpt/cache0   ONLINE       0     0     0
          gpt/cache1   ONLINE       0     0     0

errors: No known data errors
zpool remove zroot gpt/cache0
zpool remove zroot gpt/cache1
geli auf den partitionen einrichten
geli init -b -s 4096 /dev/da4p2
Enter new passphrase:
Reenter new passphrase:

Metadata backup can be found in /var/backups/da4p2.eli and
can be restored with the following command:
geli restore /var/backups/da4p2.eli /dev/da4p2
geli init -b -s 4096 /dev/da5p2
crypted partitions wieder einbinden
geli attach /dev/da4p2
Enter passphrase:
geli attach /dev/da5p2
Enter passphrase:
zpool status zroot
  pool: zroot
 state: ONLINE
  scan: none requested
config:

        NAME           STATE     READ WRITE CKSUM
        zroot          ONLINE       0     0     0
          raidz2-0     ONLINE       0     0     0
            da0p5.eli  ONLINE       0     0     0
            da1p5.eli  ONLINE       0     0     0
            da2p5.eli  ONLINE       0     0     0
            da3p5.eli  ONLINE       0     0     0
        logs
          mirror-1     ONLINE       0     0     0
            gpt/log0   ONLINE       0     0     0
            gpt/log1   ONLINE       0     0     0

errors: No known data errors
zpool add zroot cache /dev/da4p2.eli
zpool add zroot cache /dev/da5p2.eli
profit!
zpool status zroot
  pool: zroot
 state: ONLINE
  scan: none requested
config:

        NAME           STATE     READ WRITE CKSUM
        zroot          ONLINE       0     0     0
          raidz2-0     ONLINE       0     0     0
            da0p5.eli  ONLINE       0     0     0
            da1p5.eli  ONLINE       0     0     0
            da2p5.eli  ONLINE       0     0     0
            da3p5.eli  ONLINE       0     0     0
        logs
          mirror-1     ONLINE       0     0     0
            gpt/log0   ONLINE       0     0     0
            gpt/log1   ONLINE       0     0     0
        cache
          da4p2.eli    ONLINE       0     0     0
          da5p2.eli    ONLINE       0     0     0

errors: No known data errors
zil
zpool remove zroot mirror-1
geli init -b -s 4096 /dev/da4p1
[... passwordfoo]
geli init -b -s 4096 /dev/da5p1
[... passwordfoo]
geli attach /dev/da4p1
[... password bla]
geli attach /dev/da5p1
[... passwordfoo]
zpool add zroot log mirror da4p1.eli da5p1.eli
zpool status zroot
  pool: zroot
 state: ONLINE
  scan: none requested
config:

        NAME           STATE     READ WRITE CKSUM
        zroot          ONLINE       0     0     0
          raidz2-0     ONLINE       0     0     0
            da0p5.eli  ONLINE       0     0     0
            da1p5.eli  ONLINE       0     0     0
            da2p5.eli  ONLINE       0     0     0
            da3p5.eli  ONLINE       0     0     0
        logs
          mirror-1     ONLINE       0     0     0
            da4p1.eli  ONLINE       0     0     0
            da5p1.eli  ONLINE       0     0     0
        cache
          da4p2.eli    ONLINE       0     0     0
          da5p2.eli    ONLINE       0     0     0

errors: No known data errors

Debian mit Bhyve

Grob gesagt man braucht sich lediglich an die Anleitung im FreeBSD-Handbuch halten.

angepasst für unseren Anwendungsfall

Wir sollten vermutlich noch mal über die Bezeichnungen reden.

Vorbereitung

cat <EOT >> /boot/loader.conf
vmm_load="YES"
nmdm_load="YES"
EOT
Hostnetz
TAP
WE DO NOT USE THIS
ifconfig tap0 create
sysctl net.link.tap.up_on_open=1     class=0x020000 card=0x22be103c chip=0x165714e4 rev=0x01 hdr=0x00
ifconfig bridge0 create
ifconfig bridge0 addm bge0 addm tap0
ifconfig bridge0 up
PCI Passthru

HowTo: freebsd:bhyve/pci_passthru

Mit pciconf -v -l findet man herraus welchen Slot der Netzwerk-Controller hat.

pciconf -v -l
# [... lange liste ...]
# bge0@pci0:2:0:0:

Diesen überträgt man in die /boot/loader.conf

cat <EOF >> /boot/loader.conf
pptdevs="2/0/0"
EOF

pptdev ist ein String und kann auch die anderen Netzwerk-Controller über die gleiche art markieren.

pptdev="2/0/0 2/0/1"

als Ergebis zeigt einem

pciconf -v -l | grep -O ^.*pci0:2:0:0:
ppt0@pci0:2:0:0:

Weiter geht damit dann in die VM.

Debian runterladen

# wget -O /root/debian-testing-amd64-netinst.iso http://cdimage.debian.org/cdimage/weekly-builds/amd64/iso-cd/debian-testing-amd64-netinst.iso

Dataset anlegen

# zfs create -V32G -o volmode=dev zroot/inber

Device mapping

# cat device.map
(hd0) /dev/zvol/zroot/inber
(cd0) /root/debian-testing-amd64-netinst.iso

Debian Installieren

# grub-bhyve -m device.map -r cd0 -M 32678M inber

Install wählen.

# bhyve -s 0:0,hostbridge -s 1:0,lpc -s 2:0,virtio-net,tap0 -s 3:0,virtio-blk,/dev/zvol/zroot/inber -s 4:0,ahci-cd,./debian-8.7.1-amd64-netinst.iso -l com1,stdio -c 8 -m 32768M inber

Install machen.

Reset von vmm

An diesem Punkt muss die VM gelöscht werden. Der Progress bleibt im Dataset erhalten.

# bhyvectl --destroy --vm=inber

Debian starten

Boot

# grub-bhyve -m device.map -M 32678M -r hd0,msdos1 inber

VM starten

# bhyve -A -H -P -s 0:0,hostbridge -s 1:0,lpc -s 2:0,virtio-net,tap0 -s 3:0,virtio-blk,/dev/zvol/zroot/inber -l com1,/dev/nmdm0A -c 12 -m 32678M inber
mit ppt

muss die VM etwas anders gestartet werden.

bhyve -A -H -P -s 0:0,hostbridge -s 1:0,lpc -s 2:0,passthru,2/0/0 -s 3:0,virtio-blk,/dev/zvol/zroot/inber -l com1,/dev/nmdm0A -c 12 -m 32678M inber

Login

# cu -l /dev/nmdm0B -s 9600