Diskussion:NixOS: Unterschied zwischen den Versionen
Vater (Diskussion | Beiträge) |
Vater (Diskussion | Beiträge) |
||
(9 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt) | |||
Zeile 16: | Zeile 16: | ||
==== nixpkgs on [[BSD]] ==== | ==== nixpkgs on [[BSD]] ==== | ||
; [[FreeBSD]]: | |||
: Siehe [[Diskussion:BSD#FreeBSD meets Nixpkgs]] | |||
; [[Dragonfly BSD]]: | ; [[Dragonfly BSD]]: | ||
Zeile 101: | Zeile 104: | ||
:* Geraet im Dropdown-Menue auswaehlen | :* Geraet im Dropdown-Menue auswaehlen | ||
:* ''Device'' -> ''Create Partion Table'' | :* ''Device'' -> ''Create Partion Table'' | ||
:* ''gpt'' im Dropdown-Menue auswaehlen | :* <s>''gpt''</s> im Dropdown-Menue auswaehlen | ||
:* Bestaetigen | :* Bestaetigen | ||
<s> | |||
??? | ??? | ||
: <code>sgdisk -p /dev/sda</code> | : <code>sgdisk -p /dev/sda</code> | ||
Zeile 146: | Zeile 150: | ||
Number Start (sector) End (sector) Size Code Name | Number Start (sector) End (sector) Size Code Name | ||
</syntaxhighlight> | </syntaxhighlight> | ||
</s> | |||
Achtung! | |||
Bisher wurde ausschliesslich mit MBR erfolgreich die Installation durchgefuehrt. | |||
---- | ---- | ||
Zeile 235: | Zeile 243: | ||
Erstellen von einem Spiegel der Partitionen (''sda1'' und ''sdd1'') fuer das Booten der einheitlich eingerichteten Geraete ''sda'' und ''sdd'' | Erstellen von einem Spiegel der Partitionen (''sda1'' und ''sdd1'') fuer das Booten der einheitlich eingerichteten Geraete ''sda'' und ''sdd'' | ||
: <code>mdadm --create /dev/ | : <code>mdadm --create /dev/md127 --metadata=0.90 --level=mirror --raid-devices=2 /dev/sda1 /dev/sdd1</code> | ||
<syntaxhighlight lang="shell"> | <syntaxhighlight lang="shell"> | ||
mdadm: array /dev/ | mdadm: array /dev/md127 started. | ||
</syntaxhighlight> | </syntaxhighlight> | ||
<s>(theoretisches) Zerstoeren vom Spiegel der Partitionen (''sda1'' und ''sdd1'') | <s>(theoretisches) Zerstoeren vom Spiegel der Partitionen (''sda1'' und ''sdd1'') | ||
: <code>mdadm --stop /dev/ | : <code>mdadm --stop /dev/md127</code> | ||
: <code>mdadm --zero-superblock /dev/sda1 /dev/sdd1</code> | : <code>mdadm --zero-superblock /dev/sda1 /dev/sdd1</code> | ||
</s> | </s> | ||
(optionales) Anzeigen lassen der Einzelheiten des erstellten Spiegels | (optionales) Anzeigen lassen der Einzelheiten des erstellten Spiegels | ||
: <code>mdadm --detail /dev/ | : <code>mdadm --detail /dev/md127</code> | ||
<syntaxhighlight lang="shell"> | <syntaxhighlight lang="shell"> | ||
</syntaxhighlight> | </syntaxhighlight> | ||
: <code>mkfs.ext4 -m 0 -L boot -j /dev/ | : <code>mkfs.ext4 -m 0 -L boot -j /dev/md127</code> | ||
<syntaxhighlight lang="shell"> | <syntaxhighlight lang="shell"> | ||
mke2fs 1.43.7 (16-Oct-2017) | mke2fs 1.43.7 (16-Oct-2017) | ||
Zeile 281: | Zeile 289: | ||
Re-enter passphrase: | Re-enter passphrase: | ||
</syntaxhighlight> | </syntaxhighlight> | ||
===== Erstellen der Datasets gespiegelten Pool der Partitionen fuer ZFS ===== | |||
: <code>zfs create -o mountpoint=none zroot/root</code> | |||
: <code>zfs create -o mountpoint=legacy -o sync=disabled zroot/root/tmp</code> | |||
: <code>zfs create -o mountpoint=legacy zroot/root/nixos</code> | |||
: <code>zfs create -o mountpoint=legacy zroot/root/home</code> | |||
: <code>zfs set compression=lz4 zroot/root/home</code> | |||
===== Einhaengen der Speicher fuer die Installation ===== | |||
: <code>mount -t zfs zroot/root/nixos /mnt</code> | |||
: <code>mkdir /mnt/{home,tmp,boot}</code> | |||
: <code>mount /dev/md127 /mnt/boot/</code> | |||
: <code>mount -t zfs zroot/root/home /mnt/home/</code> | |||
: <code>mount -t zfs zroot/root/tmp /mnt/tmp/</code> | |||
===== Einhaengen der Speicher fuer die Installation ===== | |||
: <code>nixos-generate-config --root /mnt</code> | |||
<syntaxhighlight lang="shell"> | |||
writing /mnt/etc/nixos/hardware-configuration.nix... | |||
writing /mnt/etc/nixos/configuration.nix... | |||
</syntaxhighlight> | |||
===== Einhaengen der Speicher fuer die Installation ===== | |||
: <code>nixos-generate-config --root /mnt</code> | |||
<syntaxhighlight lang="shell"> | |||
writing /mnt/etc/nixos/hardware-configuration.nix... | |||
warning: not overwriting existing /mnt/etc/nixos/configuration.nix | |||
</syntaxhighlight> | |||
: <code>cat /mnt/etc/nixos/hardware-configuration.nix</code> | |||
<syntaxhighlight lang="nix"> | |||
# Do not modify this file! It was generated by ‘nixos-generate-config’ | |||
# and may be overwritten by future invocations. Please make changes | |||
# to /etc/nixos/configuration.nix instead. | |||
{ config, lib, pkgs, ... }: | |||
{ | |||
imports = | |||
[ <nixpkgs/nixos/modules/installer/scan/not-detected.nix> | |||
]; | |||
boot.initrd.availableKernelModules = [ "xhci_pci" "ehci_pci" "ata_piix" "usb_storage" "sd_mod" "sdhci_pci" ]; | |||
boot.kernelModules = [ "kvm-intel" ]; | |||
boot.extraModulePackages = [ ]; | |||
fileSystems."/" = | |||
{ device = "zroot/root/nixos"; | |||
fsType = "zfs"; | |||
}; | |||
fileSystems."/boot" = | |||
{ device = "/dev/disk/by-uuid/161f4a4b-93da-4722-a8bf-035451b28201"; | |||
fsType = "ext4"; | |||
}; | |||
fileSystems."/home" = | |||
{ device = "zroot/root/home"; | |||
fsType = "zfs"; | |||
}; | |||
fileSystems."/tmp" = | |||
{ device = "zroot/root/tmp"; | |||
fsType = "zfs"; | |||
}; | |||
swapDevices = | |||
[ { device = "/dev/disk/by-uuid/8d44ba2b-4cc3-4f7f-b4b4-6e78f461222b"; } | |||
]; | |||
nix.maxJobs = lib.mkDefault 4; | |||
#### powerManagement.cpuFreqGovernor = lib.mkDefault "powersave"; | |||
} | |||
</syntaxhighlight> | |||
: <code>cat /mnt/etc/nixos/hardware-configuration.nix</code> | |||
<syntaxhighlight lang="nix"> | |||
# Edit this configuration file to define what should be installed on | |||
# your system. Help is available in the configuration.nix(5) man page | |||
# and in the NixOS manual (accessible by running ‘nixos-help’). | |||
{ config, pkgs, ... }: | |||
{ | |||
imports = | |||
[ # Include the results of the hardware scan. | |||
./hardware-configuration.nix | |||
]; | |||
# Use the GRUB 2 boot loader. | |||
boot.loader.grub.enable = true; | |||
boot.loader.grub.version = 2; | |||
# boot.loader.grub.efiSupport = true; | |||
# boot.loader.grub.efiInstallAsRemovable = true; | |||
# boot.loader.efi.efiSysMountPoint = "/boot/efi"; | |||
# Define on which hard drive you want to install Grub. | |||
# boot.loader.grub.device = "/dev/sda"; # or "nodev" for efi only | |||
boot.loader.grub.devices = [ "/dev/sda" "/dev/sdd" ]; | |||
boot.zfs.enableUnstable = true; | |||
boot.supportedFilesystems = [ "zfs" ]; | |||
# networking.hostName = "nixos"; # Define your hostname. | |||
# networking.wireless.enable = true; # Enables wireless support via wpa_supplicant. | |||
networking.hostId = "ac174b52"; | |||
# Select internationalisation properties. | |||
# i18n = { | |||
# consoleFont = "Lat2-Terminus16"; | |||
# consoleKeyMap = "us"; | |||
# defaultLocale = "en_US.UTF-8"; | |||
# }; | |||
i18n = { | |||
consoleFont = "Lat2-Terminus16"; | |||
consoleKeyMap = "us"; | |||
defaultLocale = "en_US.UTF-8"; | |||
}; | |||
# Set your time zone. | |||
# time.timeZone = "Europe/Amsterdam"; | |||
time.timeZone = "Europe/Berlin"; | |||
# List packages installed in system profile. To search by name, run: | |||
# $ nix-env -qaP | grep wget | |||
# environment.systemPackages = with pkgs; [ | |||
# wget vim | |||
# ]; | |||
environment.systemPackages = with pkgs; [ | |||
wget | |||
vim | |||
firefox | |||
]; | |||
# Some programs need SUID wrappers, can be configured further or are | |||
# started in user sessions. | |||
# programs.bash.enableCompletion = true; | |||
programs.bash.enableCompletion = true; | |||
# programs.mtr.enable = true; | |||
programs.mtr.enable = true; | |||
# programs.gnupg.agent = { enable = true; enableSSHSupport = true; }; | |||
programs.gnupg.agent = { enable = true; enableSSHSupport = true; }; | |||
# List services that you want to enable: | |||
# Enable the OpenSSH daemon. | |||
# services.openssh.enable = true; | |||
services.openssh.enable = true; | |||
# Open ports in the firewall. | |||
# networking.firewall.allowedTCPPorts = [ ... ]; | |||
# networking.firewall.allowedUDPPorts = [ ... ]; | |||
# Or disable the firewall altogether. | |||
# networking.firewall.enable = false; | |||
# Enable CUPS to print documents. | |||
# services.printing.enable = true; | |||
# Enable the X11 windowing system. | |||
# services.xserver.enable = true; | |||
services.xserver.enable = true; | |||
# services.xserver.layout = "us"; | |||
services.xserver.layout = "us"; | |||
# services.xserver.xkbOptions = "eurosign:e"; | |||
services.xserver.xkbOptions = "eurosign:e"; | |||
# Enable touchpad support. | |||
# services.xserver.libinput.enable = true; | |||
# Enable the KDE Desktop Environment. | |||
# services.xserver.displayManager.sddm.enable = true; | |||
services.xserver.displayManager.sddm.enable = true; | |||
# services.xserver.desktopManager.plasma5.enable = true; | |||
services.xserver.desktopManager.plasma5.enable = true; | |||
# Define a user account. Don't forget to set a password with ‘passwd’. | |||
# users.extraUsers.guest = { | |||
# isNormalUser = true; | |||
# uid = 1000; | |||
# }; | |||
# This value determines the NixOS release with which your system is to be | |||
# compatible, in order to avoid breaking some software such as database | |||
# servers. You should change this only after NixOS release notes say you | |||
# should. | |||
system.stateVersion = "18.03"; # Did you read the comment? | |||
} | |||
</syntaxhighlight> | |||
===== Ersetzen eines der Geraete an Massenspeicher ===== | |||
tbc | |||
; MBR: | |||
; GPT: | |||
== booting from ZFS == | == booting from ZFS == | ||
Zeile 292: | Zeile 500: | ||
Das Übergeben vom Passwort ist dann vielleicht noch einmal ein anderer Akt. (Ich bilde mir ein, dass als [[PC-BSD]] zeitweise GRUB nutzte, das da bereits bei GRUB das Passwort abverlangt wurde. (<code>set kFreeBSD.kern.geom.eli.passphrase="$pass"</code> oder so ein Pfeffer<ref>https://github.com/trueos/trueos-core/blob/master/overlays/install-overlay/boot/grub/grub.cfg.trueos</ref>)) | Das Übergeben vom Passwort ist dann vielleicht noch einmal ein anderer Akt. (Ich bilde mir ein, dass als [[PC-BSD]] zeitweise GRUB nutzte, das da bereits bei GRUB das Passwort abverlangt wurde. (<code>set kFreeBSD.kern.geom.eli.passphrase="$pass"</code> oder so ein Pfeffer<ref>https://github.com/trueos/trueos-core/blob/master/overlays/install-overlay/boot/grub/grub.cfg.trueos</ref>)) | ||
== Domains == | |||
* nix | |||
** guide | |||
** style | |||
** support | |||
** training | |||
** earth | |||
** international | |||
** world | |||
** land | |||
** city | |||
** farm | |||
** team | |||
** group | |||
** community | |||
** center | |||
** school | |||
** academy | |||
** institute | |||
** company | |||
** promo | |||
** tools | |||
** network | |||
** … | |||
* nixos | |||
** … |
Version vom 3. Mai 2018, 15:36 Uhr
Ideen für Ideen zu und rund um NixOS
NixOS meets iRedMail
(g)ui the whole configuration.nix
- gui oder wui
- Unmöglichkeit von Typos
- bessere Übersicht zu (allen) verfügbaren Optionen
- ...
NixOS as FreeBSD
- aka uNix oder FreeNix oder NixBSD
nixpkgs on BSD
- Anwendungsbeispiele
- nix für Jails
my perfect NixOS laptop installation
The goal is to set up a sweet default for the usage of a (usual) laptop running NixOS.
- Probably we are going to use a ThinkPad (idea of the project denkende Bretter bohren). Of course everybody can bring their own device.
The "perfect" setup seems to be:
- NixOS
- ZFS (for everything but /boot)
- ext4 might be possible also but is not as feature rich. btrfs should be also available to install (NixOS) on.
- 2 mirrored disks (nice to have)
- (A caddy for a second disk (for a ThinkPad) will be there for testing such a setup. user:vater has got one.)
- all data encrypted (as far as possible - for / but probably without /boot)
- Probably we have to use the 18.03 (version of NixOS, a prerelease) b/c we also want to test native ZFS encryption.
- (maybe a device or file for swap)
Installation
Hardware
- Laptop
- lenovo ThikPad T430
- Massenspeicher
- 2 x 500 GB HDD
- 1 x 24 GB SSD
- 1 x 16 GB USB
- Arbeitsspeicher
- 2 x 8 GB DDR3
Partitionieren und Formatieren
Bestandsaufnahme der verfuegbaren Geraete an Massenspeicher
lsblk
fdisk -l /dev/sda
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
fdisk -l /dev/sdb
Disk /dev/sdb: 22.4 GiB, 24015495168 bytes, 46905264 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
fdisk -l /dev/sdc
Disk /dev/sdc: 14.9 GiB, 16005464064 bytes, 31260672 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
fdisk -l /dev/sdd
Disk /dev/sdd: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Partitionierung eines verfuegbaren Geraetes an Massenspeicher
- Pauschales Erstellen einer neuen Partitionstabelle auf jedem Geraet, das kuenftig Bestandteil vom Setup sein soll
- BTW: Das kann auch gern auf der grafischen Oberflaeche mit GParted gemacht werden.
- Geraet im Dropdown-Menue auswaehlen
- Device -> Create Partion Table
gptim Dropdown-Menue auswaehlen- Bestaetigen
???
sgdisk -p /dev/sda
Number Start (sector) End (sector) Size Code Name
1 2048 2099199 1024.0 MiB 8300 Linux filesystem
2 2099200 976773119 464.8 GiB 8300 Linux filesystem
sgdisk -Z /dev/sda
GPT data structures destroyed! You may now partition the disk using fdisk or other utilities.
sgdisk -o /dev/sda
Creating new GPT entries.
The operation has completed successfully.
sgdisk -p /dev/sda
Disk /dev/sdd: 976773168 sectors, 465.8 GiB
Model:
Sector size (logical/physical): 512/4096 bytes
Disk identifier (GUID):
Partition table holds up to 128 entries
Main partition table begins at sector 2 and ends at sector 33
First usable sector is 34, last usable sector is 976773134
Partitions will be aligned on 2048-sector boundaries
Total free space is 976773101 sectors (465.8 GiB)
Number Start (sector) End (sector) Size Code Name
Achtung! Bisher wurde ausschliesslich mit MBR erfolgreich die Installation durchgefuehrt.
sgdisk -a1 -n2:34:2047 -t2:EF02 /dev/sda
sgdisk -n1:0:0 -t1:BF01 /dev/sda
sgdisk -p /dev/sda
Disk /dev/sda: 976773168 sectors, 465.8 GiB
Model:
Sector size (logical/physical): 512/4096 bytes
Disk identifier (GUID):
Partition table holds up to 128 entries
Main partition table begins at sector 2 and ends at sector 33
First usable sector is 34, last usable sector is 976773134
Partitions will be aligned on 8-sector boundaries
Total free space is 0 sectors (0 bytes)
Number Start (sector) End (sector) Size Code Name
1 2048 976773134 465.8 GiB BF01
2 34 2047 1007.0 KiB EF02
Partitionierung eines weiteren Geraetes an Massenspeicher
Replizieren der Partitionstablle vom eingerichteten Geraet sda auf das gleichermassen einzurichtende Geraet sdd
sgdisk /dev/sda -R /dev/sdd
The operation has completed successfully.
Generieren einer neuen (abweichenden) GUID fuer das gleichermassen einzurichtende Geraet sdd
sgdisk -G /dev/sdd
Erstellen vom Spiegel der Partitionen fuers Booten
- (leider) ohne ZFS
- Spiegeln (in Anlehnung an den Spiegel von ZFS) der Geraete
Erstellen von einem Spiegel der Partitionen (sda1 und sdd1) fuer das Booten der einheitlich eingerichteten Geraete sda und sdd
mdadm --create /dev/md127 --metadata=0.90 --level=mirror --raid-devices=2 /dev/sda1 /dev/sdd1
mdadm: array /dev/md127 started.
(theoretisches) Zerstoeren vom Spiegel der Partitionen (sda1 und sdd1)
mdadm --stop /dev/md127
mdadm --zero-superblock /dev/sda1 /dev/sdd1
(optionales) Anzeigen lassen der Einzelheiten des erstellten Spiegels
mdadm --detail /dev/md127
mkfs.ext4 -m 0 -L boot -j /dev/md127
mke2fs 1.43.7 (16-Oct-2017)
Creating filesystem with 122096368 4k blocks and 30531584 inodes
Filesystem UUID: eb3bd738-a661-400e-a0dc-990bace991d7
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968,
102400000
Allocating group tables: done
Writing inode tables: done
Creating journal (262144 blocks): done
Writing superblocks and filesystem accounting information:
done
Erstellen vom gespiegelten Pool der Partitionen fuer ZFS
zpool create -f -o ashift=12 -o altroot=/mnt -O encryption=aes-256-gcm -O keyformat=passphrase zroot mirror /dev/sda1 /dev/sdd1
Enter passphrase:
Re-enter passphrase:
Erstellen der Datasets gespiegelten Pool der Partitionen fuer ZFS
zfs create -o mountpoint=none zroot/root
zfs create -o mountpoint=legacy -o sync=disabled zroot/root/tmp
zfs create -o mountpoint=legacy zroot/root/nixos
zfs create -o mountpoint=legacy zroot/root/home
zfs set compression=lz4 zroot/root/home
Einhaengen der Speicher fuer die Installation
mount -t zfs zroot/root/nixos /mnt
mkdir /mnt/{home,tmp,boot}
mount /dev/md127 /mnt/boot/
mount -t zfs zroot/root/home /mnt/home/
mount -t zfs zroot/root/tmp /mnt/tmp/
Einhaengen der Speicher fuer die Installation
nixos-generate-config --root /mnt
writing /mnt/etc/nixos/hardware-configuration.nix...
writing /mnt/etc/nixos/configuration.nix...
Einhaengen der Speicher fuer die Installation
nixos-generate-config --root /mnt
writing /mnt/etc/nixos/hardware-configuration.nix...
warning: not overwriting existing /mnt/etc/nixos/configuration.nix
cat /mnt/etc/nixos/hardware-configuration.nix
# Do not modify this file! It was generated by ‘nixos-generate-config’
# and may be overwritten by future invocations. Please make changes
# to /etc/nixos/configuration.nix instead.
{ config, lib, pkgs, ... }:
{
imports =
[ <nixpkgs/nixos/modules/installer/scan/not-detected.nix>
];
boot.initrd.availableKernelModules = [ "xhci_pci" "ehci_pci" "ata_piix" "usb_storage" "sd_mod" "sdhci_pci" ];
boot.kernelModules = [ "kvm-intel" ];
boot.extraModulePackages = [ ];
fileSystems."/" =
{ device = "zroot/root/nixos";
fsType = "zfs";
};
fileSystems."/boot" =
{ device = "/dev/disk/by-uuid/161f4a4b-93da-4722-a8bf-035451b28201";
fsType = "ext4";
};
fileSystems."/home" =
{ device = "zroot/root/home";
fsType = "zfs";
};
fileSystems."/tmp" =
{ device = "zroot/root/tmp";
fsType = "zfs";
};
swapDevices =
[ { device = "/dev/disk/by-uuid/8d44ba2b-4cc3-4f7f-b4b4-6e78f461222b"; }
];
nix.maxJobs = lib.mkDefault 4;
#### powerManagement.cpuFreqGovernor = lib.mkDefault "powersave";
}
cat /mnt/etc/nixos/hardware-configuration.nix
# Edit this configuration file to define what should be installed on
# your system. Help is available in the configuration.nix(5) man page
# and in the NixOS manual (accessible by running ‘nixos-help’).
{ config, pkgs, ... }:
{
imports =
[ # Include the results of the hardware scan.
./hardware-configuration.nix
];
# Use the GRUB 2 boot loader.
boot.loader.grub.enable = true;
boot.loader.grub.version = 2;
# boot.loader.grub.efiSupport = true;
# boot.loader.grub.efiInstallAsRemovable = true;
# boot.loader.efi.efiSysMountPoint = "/boot/efi";
# Define on which hard drive you want to install Grub.
# boot.loader.grub.device = "/dev/sda"; # or "nodev" for efi only
boot.loader.grub.devices = [ "/dev/sda" "/dev/sdd" ];
boot.zfs.enableUnstable = true;
boot.supportedFilesystems = [ "zfs" ];
# networking.hostName = "nixos"; # Define your hostname.
# networking.wireless.enable = true; # Enables wireless support via wpa_supplicant.
networking.hostId = "ac174b52";
# Select internationalisation properties.
# i18n = {
# consoleFont = "Lat2-Terminus16";
# consoleKeyMap = "us";
# defaultLocale = "en_US.UTF-8";
# };
i18n = {
consoleFont = "Lat2-Terminus16";
consoleKeyMap = "us";
defaultLocale = "en_US.UTF-8";
};
# Set your time zone.
# time.timeZone = "Europe/Amsterdam";
time.timeZone = "Europe/Berlin";
# List packages installed in system profile. To search by name, run:
# $ nix-env -qaP | grep wget
# environment.systemPackages = with pkgs; [
# wget vim
# ];
environment.systemPackages = with pkgs; [
wget
vim
firefox
];
# Some programs need SUID wrappers, can be configured further or are
# started in user sessions.
# programs.bash.enableCompletion = true;
programs.bash.enableCompletion = true;
# programs.mtr.enable = true;
programs.mtr.enable = true;
# programs.gnupg.agent = { enable = true; enableSSHSupport = true; };
programs.gnupg.agent = { enable = true; enableSSHSupport = true; };
# List services that you want to enable:
# Enable the OpenSSH daemon.
# services.openssh.enable = true;
services.openssh.enable = true;
# Open ports in the firewall.
# networking.firewall.allowedTCPPorts = [ ... ];
# networking.firewall.allowedUDPPorts = [ ... ];
# Or disable the firewall altogether.
# networking.firewall.enable = false;
# Enable CUPS to print documents.
# services.printing.enable = true;
# Enable the X11 windowing system.
# services.xserver.enable = true;
services.xserver.enable = true;
# services.xserver.layout = "us";
services.xserver.layout = "us";
# services.xserver.xkbOptions = "eurosign:e";
services.xserver.xkbOptions = "eurosign:e";
# Enable touchpad support.
# services.xserver.libinput.enable = true;
# Enable the KDE Desktop Environment.
# services.xserver.displayManager.sddm.enable = true;
services.xserver.displayManager.sddm.enable = true;
# services.xserver.desktopManager.plasma5.enable = true;
services.xserver.desktopManager.plasma5.enable = true;
# Define a user account. Don't forget to set a password with ‘passwd’.
# users.extraUsers.guest = {
# isNormalUser = true;
# uid = 1000;
# };
# This value determines the NixOS release with which your system is to be
# compatible, in order to avoid breaking some software such as database
# servers. You should change this only after NixOS release notes say you
# should.
system.stateVersion = "18.03"; # Did you read the comment?
}
Ersetzen eines der Geraete an Massenspeicher
tbc
- MBR
- GPT
booting from ZFS
GRUB kann doch ZFS, oder?
- oder ist das nur ein Ding für FreeBSD?
- https://wiki.archlinux.org/index.php/Installing_Arch_Linux_on_ZFS#Booting_your_kernel_and_initrd_from_ZFS
- https://wiki.archlinux.org/index.php/ZFS#GRUB-compatible_pool_creation
- https://www.gnu.org/software/grub/manual/grub/html_node/Multi_002dboot-manual-config.html
Das Übergeben vom Passwort ist dann vielleicht noch einmal ein anderer Akt. (Ich bilde mir ein, dass als PC-BSD zeitweise GRUB nutzte, das da bereits bei GRUB das Passwort abverlangt wurde. (set kFreeBSD.kern.geom.eli.passphrase="$pass"
oder so ein Pfeffer[1]))
Domains
- nix
- guide
- style
- support
- training
- earth
- international
- world
- land
- city
- farm
- team
- group
- community
- center
- school
- academy
- institute
- company
- promo
- tools
- network
- …
- nixos
- …